Select a report item category from the drop-down list. Items in this category are displayed in the Available list below.

Displays items that may be included in the report. The Available list is divided into six categories: Input, Output, Pictures, Reports, STAAD.etc Output, Steel Design Output and Advanced Query Reports.  Input lists all input related data that may be included in a report. Output lists all output related data that may be included in a report.  Pictures lists all the pictures included in the Picture Album.  Reports lists all reports that have been previously created and saved.  Thus, reports may contain sub-reports.  STAAD.etc Output - if a component design such as Base Plate design, Footing design, or a Moment Connection design, using the interface with the STAAD.etc program is carried out - see Section 2.3.8 of this manual - the results of that design can be included in the final report by selecting this item. Steel Design Output - if members are designed through the Interactive Design | Steel Design, then the design output for the members are listed in this category and can be included in the final report. Advanced Query Reports are customized reports created using the facility Tools | SQL Query | Advanced Query.

Displays items that have been selected for the report. The Report Detail Increments edit box is used to specify the number of segments into which a member would be broken up for printing section forces. Buttons to transfer selected items from the Available to the Selected list (> and >> ) and vice versa (<  and << ) are included.  Also, note that there are up and down arrows to the right of the Selected list.  These buttons are used for arranging the order of the items in the report. 

There are a few methods for moving items from the Available list to the Selected list.  Select the type of items you wish to choose from, Input, Output, Pictures or Reports.  Note that these items may be mixed and matched.  They are categorized to make locating items easier.  Clicking on the right-pointing double arrow button (>>) moves all items in the Available list to the Selected list.  To move only selected items, select the items. To select multiple items, hold down the Control key while selecting items. Transfer the selected items to the Selected list by clicking on the right-pointing single arrow button (>).  Double clicking on an item in the Available list will move it to the Selected list. 

When this dialog box opens, a default item, Job Information appears in the Selected list. You may remove one or more items from the Selected list by clicking on the < or << arrow buttons.

Items in the Selected list can be rearranged in any desired order.  To rearrange items, select the item to be moved up or down in the list and then use the up or down arrow to the right of the Selected list.

Displays items that may be included in the report. The Available list is divided into six categories: Input, Output, Pictures, Reports, STAAD.etc Output, Steel Design Output and Advanced Query Reports.  Input lists all input related data that may be included in a report. Output lists all output related data that may be included in a report.  Pictures lists all the pictures included in the Picture Album.  Reports lists all reports that have been previously created and saved.  Thus, reports may contain sub-reports.  STAAD.etc Output - if a component design such as Base Plate design, Footing design, or a Moment Connection design, using the interface with the STAAD.etc program is carried out - see Section 2.3.8 of this manual - the results of that design can be included in the final report by selecting this item. Steel Design Output - if members are designed through the Interactive Design | Steel Design, then the design output for the members are listed in this category and can be included in the final report. Advanced Query Reports are customized reports created using the facility Tools | SQL Query | Advanced Query.

Displays items that have been selected for the report. The Report Detail Increments edit box is used to specify the number of segments into which a member would be broken up for printing section forces. Buttons to transfer selected items from the Available to the Selected list (> and >> ) and vice versa (<  and << ) are included.  Also, note that there are up and down arrows to the right of the Selected list.  These buttons are used for arranging the order of the items in the report. 

There are a few methods for moving items from the Available list to the Selected list.  Select the type of items you wish to choose from, Input, Output, Pictures or Reports.  Note that these items may be mixed and matched.  They are categorized to make locating items easier.  Clicking on the right-pointing double arrow button (>>) moves all items in the Available list to the Selected list.  To move only selected items, select the items. To select multiple items, hold down the Control key while selecting items. Transfer the selected items to the Selected list by clicking on the right-pointing single arrow button (>).  Double clicking on an item in the Available list will move it to the Selected list. 

When this dialog box opens, a default item, Job Information appears in the Selected list. You may remove one or more items from the Selected list by clicking on the < or << arrow buttons.

Items in the Selected list can be rearranged in any desired order.  To rearrange items, select the item to be moved up or down in the list and then use the up or down arrow to the right of the Selected list.

Select to group modal results by Node number or by Mode number.

Displays available modes in the mode.

Displays all modes in the model. All mode shapes will be added to the Selected list by default.

Select this option to include all model entities in the report (default).

Select this option to select a previously saved view in the drop-down list. Only model entities included in the selected view will be included in the report.

Select this option to select a previously defined group name in the drop-down list. Only model entities included in the selected group will be included in the report.

Select this option to select a property tag in the drop-down list. Only model entities included in the selected property will be included in the report.

Select this option to specify a range of Nodes (by node number) and/or Beams/Plates/Solids (by entity number). Separate individual entries in either list using a comma. Ranges of values can be represented using a dash (e.g., 5-10).

radio buttons allow the selection of results generated by the code check facility. Use the radio buttons to specify whether to include no results, all results, the results of the first check or the results of the final check.

radio buttons allow the selection of results generated by the member selection facility. Use the radio buttons to specify whether to include no results, all results, the results of the first select or the results of the final check.

Set this option to include a brief design summary for a BS 5950 steel design. Otherwise, the specified level of details (TRACK command option) is used.

Set this option to include only steel design results for members which have failed one or more checks. Otherwise, the specified level of details (TRACK command option) is used for both passing and failing members.

Opens an Font dialog, which is used to change the typeface parameters used for steel design results. The current font settings are displayed adjacent to this button.

A list of all available pictures appears in the drop down list.

Removes the currently selected picture from the picture album.

radio buttons allow the selection of results generated by the code check facility. Use the radio buttons to specify whether to include no results, all results, the results of the first check or the results of the final check.

Type or edit the caption to be included with the drawing in the report.

Set this option to specify values of Height and Width equal to the full size of the default paper size. The picture will then take up an entire page of the report.

Specify printed dimensions for the selected picture. The aspect ration of the picture will remain constant, so updating one dimension will update the other.

Click in/mm beside either dimension to toggle between the two units of length.

Opens an Font dialog, which is used to change the typeface parameters used for steel design results. The current font settings are displayed adjacent to this button.

Specify optional sheet number prefix or suffix content in the respective field. This is useful if the STAAD.Pro report is to be included in an appendix or some other format where a special numbering format is used.

Specify the initial page number used for the report. This is useful if you have other content to include in a larger report before the STAAD.Pro output.

Set this option to reverse the order in which pages are sent to the printer. The contents of the report, including sheet number, are not affected by this option.

Set this option to include grid lines around and between table elements.

Set this option to add a page break after each table, even when a table does not fill an entire page alone.

Opens a Font dialog, which is used to select the type face properties for the Column Heading or Table contents. The current font face and size are displayed for each setting.

Select the horizontal position in the company identification portion of the report header.

Opens a Font dialog, which is used to select the type face properties for the logo.

Previously saved reports are available in the drop-down list. Select one to load the report details for editing, printing, or deletion.

Opens the Save Report dialog, which is used to provide a name for the current report settings. Click OK in this dialog to save the named report in the Report list.

Removes the selected report name in the Report list.

Saves any changes to the Report setup and closes the dialog.

Closes the dialog with out saving any changes.

Prints the report with the current settings.

Opens the STAAD.Pro Help window.