|
Settings group
|
| Control | Description |
|---|
|
Rigid Diaphragm (Master - Slave)
|
Applies 'Rigid Diaphragm' in the model.
|
|
Member Offset
|
Used to consider Member offset in the model.
|
|
Release Torsion for Columns
|
Releases columns for torsion. |
|
Release Torsion for Beams
|
Releases beams for torsion. |
|
|
Load Cases group
|
| Control | Description |
|---|
|
Wind Load
|
Wind load will be applied to the analytical model using the load parameters indicated in the Wind Parameters dialog.
|
|
Gust Load
|
Gust (wind) load will be applied to the analytical model using the load parameters indicated in the Wind Parameters dialog. |
|
Temperature Load
|
Note: This option is currently inactive.
|
|
Seismic Load
|
Earthquake Load per IS 1893 will be applied to the analytical model using the load parameters in the Seismic Parameters dialog.
|
|
|
Building Type
|
This option is used to create appropriate load combinations.
- For Irregular buildings, both positive and negative direction load cases are generated.
- For Regular buildings, only positive direction load cases are generated.
|
|
Generate EQ Load Using
|
Specifies that earthquake load are created using either Reference Load or by Joint Weight.
|
|
Generate
|
Click generate the STAAD input file and open in Modeling mode. |
