D8.A.7 Seismic Detailing per Section 12
Seismic detailing per portions of Section 12 of IS 800-2007 can be performed by STAAD.Pro for LSD design.
The program will check seismic detailing requirements when the design parameter SEISMIC (design detailing for earthquake load) has been specified as 1. It is also recommended that an IS 1893 seismic load definition is included in the model.
Note: This is only available for design using the LFD method. It is not applicable to design
using the ASD method.
Additionally, a set of automatic load combinations is included per IS 800 (in the IS 456 / IS 800 code selection) for IS 800 Clause 12.2.3 which is intended for use with these checks.
Applicable Code Sections
The following portions of Section 12 have been implemented in STAAD.Pro:
- 12.2.1
- 12.2.3 - the IS 800 load combinations should be manually added or included from automatically generated load combinations
- 12.3
- 12.5.1.1
- 12.7.1.1
- 12.7.1.2 - the bracing type should be consistent with the SSY and SSZ parameters specified
- 12.7.2.1
- 12.7.2.2
- 12.7.2.4
- 12.7.2.6
- 12.8.1.1
- 12.8.1.2 - the bracing type should be consistent with the SSY and SSZ parameters specified
- 12.8.2.1
- 12.8.2.2
- 12.8.2.3
- 12.8.2.5
- 12.8.2.7
- 12.8.4.1
- 12.10.1.1.
- 12.11.1
- 12.11.1.1
- 12.11.3.1