Results tab
Tool name | Description | |
---|---|---|
Load | Select the active load case, load combination, or load envelope from the pop-up dialog. | |
View Loading Diagram |
Click to toggle the display of the current load case on the structure. | |
Deflection |
Displays the deflected shape on the structure using nodal displacements. | |
Displacement |
Displays the nodal and beam sectional displacements. | |
Utilization Ratio |
Displays the design code based utilization ratio, for code checks and member selection operations, in annotated form on the structure diagram. | |
FX |
Displays the axial force diagram on the structure. | |
FY |
Displays the shear force Y diagram on the structure. | |
FX |
Displays the shear force Z diagram on the structure. | |
MX |
Displays the torsion diagram on the structure. | |
MY |
Displays the bending moment Y diagram on the structure. | |
MZ |
Displays the bending moment Z diagram on the structure. | |
Beam Stress |
Displays the beam stress diagrams on the structure. | |
Plate Stress |
Displays plate stress contours on the structure. | |
Solid Stress |
Displays solid stress contours on the structure. | |
Layouts > |
Displacement | Displays the nodal and beam sectional displacements, along with the Node Displacements table and Beam Relative Displacements Detail table. This has the same effect as selecting the Displacements page in the Postprocessing workflow. |
Reaction | Displays the support reactions, along with the Support Reactions table and Statics Check Results table. This has the same effect as selecting the Reactions page in the Postprocessing workflow. | |
Instability | Displays unstable joints if any were detected in the analysis along with the Unstable Joints table. | |
Base Pressure | Displays the soil pressure at support node locations for slabs consisting of plate elements generated using either the elastic mat or plate mat commands along with the Base Pressure table. | |
Beam Forces | Displays the force diagram on the structure for the selected load case along with the Beam End Forces table and Beam Force Detail table. This has the same effect as selecting the Beam Results page in the Postprocessing workflow. | |
Beam Stress | Displays the member stress diagram on the structure (same as the Beam Stress tool), along with the 3D Beam Stress Contour view and Beam Combined Axial and Bending table. | |
Utilization | Displays the design code based utilization ratio, for code checks and member selection operations, in annotated form on the structure diagram (same as the Utilization tool) along with the Design Results table. | |
Graphs | Displays the current loading on the structure in the main view along with a set of three Beam Graph windows which display force or bending diagrams for the currently selected member. | |
Plate Stress | Displays the graphical plate stress contour diagram
superimposed on the elements along with the Plate Corner
Stress table and Plate Center Stress
table. This item will also open the Diagrams dialog to the Plate Stress Contour tab. |
|
Results Along Line | Opens the Results Along Line dialog along with the line graph and Result along selected line table. | |
Solid Stress | Displays the graphical Solid Stress Contour diagram superimposed on the
elements along with the Solid Corner Stress table
and the Solid Center Stress table. This has the
same effect as selecting the Solid Results page
in the Postprocessing workflow. This item will also open the Diagrams dialog to the Solid Stress Contour tab. |
|
Node Displacement | Displays the deflected shape for the selected load case and load step, along with the Node Displacements Curve graph and Node Displacement table. | |
Beam Forces | Opens the Load Level vs Section Forces diagram and Beam Force Detail table. |
Tool name | Description | |
---|---|---|
Mode | Select the mode number from the drop-down list. | |
Mode Shape |
Displays the mode shape diagrams for individual modes. | |
Relative Response |
||
Time Steps |
Opens a drop-down control which allows you to move through time history steps using a slider control or by typing the time directly. | |
Layouts > |
Dynamic - Mode Shape | Displays the mode shape diagram on the structure, along with a table of mode shapes. This has the same effect as selecting the Dynamics page in the Postprocessing workflow. |
Dynamic - Displacement | Displays the time-displacement graphs for a selected node or node group in the structure. | |
Dynamic - Velocity | Displays the time-velocity graphs for a selected node or node group in the structure. | |
Dynamic - Acceleration | Displays the time-acceleration graphs for a selected node or node group in the structure. | |
Dynamic - Floor Spectrum | Displays the Response Spectrum graph and Response Spectrum table. | |
Pushover - Loads |
Opens the Load Values table, which
displays the nodal load values and total base shear for the selected
load step, along with the Capacity
Curve table.
The magnitude and direction of the loads in the current load step are displayed in the view window. |
|
Pushover - Graphs |
Opens the Capacity Curve graph, which
displays displacement vs. force for the pushover analysis.
The Capacity Curve table contains the roof or control joint displacement and base shear values recorded for each load step. |
|
Pushover - Node Results | Displays nodal
displacements and rotations in the Node Displacements table and the
support reactions in the Support Reactions table for the
selected load step. The deflected shape is overlaid on the structure in the view window. |
|
Pushover - Beam Results | Opens the Beam Hinge Results table which
displays the status of the beam and hinge conditions along each beam's
length. The Beam Force Detail table displays
the cross-sectional forces and moments at sections along each beam's
length are displayed for the selected load step. The status of beams and hinges are displayed in the view window. |
|
Steady State - Displacement | Displays the frequency-displacement graphs in the global directions for a steady state analysis. | |
Steady State - Velocity | Displays the frequency-velocity graphs in the global directions for a steady state analysis. | |
Steady State - Acceleration | Displays the frequency-acceleration graphs in the global directions for a steady state analysis. | |
Buckling | Opens the Buckling Factors table, which displays the calculated buckling factors from a buckling analysis, along with the Buckling Modes table. |
Tool name | Description |
---|---|
Update Properties |
Updates the section properties assigned to
members in the input file to those which are the result of a design member
selection or group member command.
If member selection is carried out for steel, timber or aluminum sections in the model, or if a GROUP MEMBER command is specified (see TR.50 グループの設定), the properties of the structure at the end of these processes will no longer be the same as what we assigned initially or started out with. A warning dialog opens to confirm you wish to proceed before making any changes. 注記: By performing
this operation, the input file gets modified. Consequently, the analysis
results are no longer compatible with the modified structure. Therefore, the
Analytical Modeling workflow is
automatically selected so the structure can be re-analyzed. Before doing so, it
is advisable to go back and replace the
SELECT and
GROUPing commands with
CHECK CODE commands.
|