D4.D.7 Code Checking
The purpose of code checking is to check whether the provided section properties of the members are adequate. The adequacy is checked as per the CSA086-01 requirements.
Code checking is done using forces and moments at specified sections of the members. The code checking output labels the members as PASSed or FAILed. In addition, the critical condition, governing load case, location (distance from the start joint) and magnitudes of the governing forces and moments are also printed.
Refer to D1.G.6 Member Design Capabilities for general information on Code Checking. Refer to TR.52.2 コードチェックの設定 for details the specification of the Code Checking command.