M. To add a concentrated force or moment on members
To add either concentrated forces or members at a point along the length of a member, use the following procedure.
-
Either:
On the Loading ribbon tab, select the Load Items tool in the Loading Specifications group
ヒント: This will add the load item to the currently selected load group selected in the program status bar.または
In the Load & Definition dialog, select a primary load case in the Load Cases Details list and then click Add.
- Select either:
- Type the location along the length of the member to the concentrated load, d1. This distance is measured from the start node of the member.
- Type the lateral offset from the geometric centerline to the load, d2.
- Select the Direction option in which the load acts. Concentrated loads can be applied in the global or local coordinates.
- Click Add. The load item is added to the selected load case.