D. To check connection tags
To check the assigned connection tags capacity using the STAAD.Pro analysis results, use the following steps.
Prior to checking connections, you must perform a successful analysis on the model so analysis results at member ends can be compared to connection capacities.
Additionally, each beam and connecting member (beam or column) must have a connection capacity for the sections used in the associated Connection Tags XML file to facilitate checking connections.
- Select one or more members in the view window.
-
Either:
on the Beam Tools ribbon tab, select the Check tool in the Connection Tags group
または
on the Utilities ribbon tab, select the in the Tools group
または
- Select the load case types you want to use in the Select Load Case Types drop-down list. The load cases list displays only the type or types selected.
- Either:
- Click Check. The Connection Tag Check Results table opens. This table displays the connection tag data from the Connection Tag XML file capacity used checked against the critical load case at each member end with a connection tag. The status of the check (i.e., Pass or Fail) is listed in the Remarks column.