D1.G.8 Tabulated Results of Member Design
For CODE CHECKING and/or MEMBER SELECTION the output results are printed as shown in the previous section. The items are explained as follows:
 MEMBER refers to the member number for which the design is performed.
 TABLE refers to the size of the PRISMATIC section (B X D or ZD X YD).
 RESULT prints whether the member has PASSed or FAILed.

CRITICAL COND refers to the CLAUSE or FORMULA NO. from the TIMBER CONSTRUCTION MANUAL (3rd. Edition, AITC1985) which governed the design. See following table:
Table 1. Critical conditions evaluated per AITC code Critical Condition Governing Criteria Clause 519 Axial Compression and Bending with MINIMUM ECCENTRICITY. Clause 518 Axial Compression and Bending Clause 542 Axial Tension and Bending Clause 524 Horizontal Shear Clause 5.40 Lateral stability for net compressive stress in case of Tension and Bending.  RATIO prints the ratio of the actual stresses to allowable stresses for the critical condition. This ratio is usually the cumulative ratio of stresses in the interaction formula. In case of shear governing the design, it means the ratio of the actual shear stress to allowable shear stress. If this value exceeds the allowable ratio (default 1.0) the member is FAILed.
 LOADING provides the load case number that governed.
 FX, MY and MZ provide the design axial force, moment in local Y axes and moment in local Z axes respectively. FX value is followed by a letter C or T to denote COMPRESSION or TENSION.
 LOCATION specifies the actual distance from the start of the member to the section where design forces govern in case BEAM command or SECTION command is specified.
OUTPUT parameters that appear within the box are explained as follows:
 MEMB refers to the same member number for which the design is performed.
 GLULAM GRADE refers to the grade of the timber.
 LAM refers to lamination thickness provided in the input or assumed by the program. See INPUT PARAMETERS section.
 LZ, LY, LUZ and LUY are the effective lengths as provided or calculated. See INPUT PARAMETERS section.
 JZ and JY are the modifiers for the PDELTA effect about Zaxis and Yaxis respectively. These are calculated by the program.
 CDT, CSF, WET, CCR, CTM are the allowable stress modifiers explained in the INPUT PARAMETERS section.
 CFZ and CFY are values of the size factors in the Zaxis and Yaxis respectively. CLZ and CLY represent the factors of lateral stability for beams about Zaxis and Yaxis respectively. These values are printed to help the user see the intermediate design values and recheck the design calculations.
 f_{a}, f_{bz}, f_{by}, f_{vz} and f_{vy} are the actual axial stress, bending stresses about Z and Y axes and horizontal shear stresses about Z and Y axes respectively. If the bending moments about both axes are less then the eccentric moments based on min. eccentricity then bending stresses are calculated based on the min. eccentricity . Refer DESIGN OPERATIONS section for details.
 FA, FBZ, FBY, FVZ, and FVY are the final allowable axial, bending (Z and Y axes) and horizontal shear (Z and Y axes) stresses. See D1.G.2 Allowable Stress per AITC Code for details.
D1.G.8.1 Example Glulam Member Design
STAAD.Pro CODE CHECKING  (AITC) *********************** ALL UNITS ARE  POUN FEET (UNLESS OTHERWISE NOTED) MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/ FX MY MZ LOCATION ======================================================================= 1 10.750X16.500 GLULAM GRADE:GLT24FV8_DF/DF PASS CL.5.9.2 0.014 3 4583.17 C 0.00 1310.87 12.0000   LEZ = 144.000 LEY = 144.000 LUZ = 144.000 LUY = 144.000 INCHES     CD = 1.000 CMB = 1.000 CMT = 1.000 CMC = 1.000 CMP = 1.000   CMV = 1.000 CME = 1.000 CFB = 1.000 CFT = 1.000 CFC = 1.000   CFU = 1.000 CR = 1.000 CTT = 1.000 CC = 1.000 CF = 1.000   CT = 1.000 CH = 1.000 CB = 1.000 CI = 1.000 CV = 0.000   CLY = 0.999 CLZ = 0.997 CP = 0.934 c = 0.900 E' = 1600000.122 PSI     ACTUAL STRESSES : (POUND INCH)   fc = 25.839 ft = 0.000   f_cby = 0.000 f_cbz = 32.249   fv = 0.000   ALLOWABLE STRESSES: (POUND INCH)   FC = 1541.320 FT = 0.000   FCBY = 1448.972 FCBZ = 2340.789   FCEY = 0.000 FCEZ = 8780.903   FBE = 3727.248   FTB = 0.000 F**TB = 0.000   FV = 0.000 SLENDERNESS = 50.000  