STAAD.Pro Help

D. Results menu

This menu contains the following command:

Menu item What it does
Design Results Setup Opens the Design Results Setup dialog, which is used to control the display of results by design group and color.
Individual Graphs

Opens a Member Graph window for the selected element or member. Each window can show results of multiple  force types and multiple load cases, combinations and/or envelopes.

Tip: To change or add load cases or lines to the graph, use the Diagrams command from the View menu.
Main Reinforcement Diagram

Displays the result of the design on the current member. The diagram is divided into parts which can be resized by dragging the separator.  A Beam Design produces a different diagram to a column design.

Shear Reinforcement Diagram Displays the shear result of the design on the current member. The diagram is divided into three parts that can be resized by dragging the separator.  A Beam Design produces a different diagram to a column design.
Plan View Toggles the view on the top section of a main or shear reinforcement diagram to display the reinforcement from an elevation view to a plan view.
Beam Spans Opens the Beam Spans table, which provides member span and support information.
Main Reinforcement Opens the Main Reinforcement table, which shows the design moments, required steel areas and provided steel bars for each location along the beam that was checked.
Shear Links Opens the Shear Links table, which shows the shear forces and stresses at the design locations along with the required steel area.
Shear Zones Opens the Shear Zones table, which displays the results of the shear design.
Deflection Opens the Span/Depth Ratio table, which is used to verify the limit of effective depth divided by the actual span length is not exceeded.
Scheduled Bars Opens the Member # Scheduled Bars table, which is used to specify individual covers and link sizes for each span, as well as verify the support definitions.
Member Summary Opens the Summary table for the group design, which displays the pass/fail status of all members in the Design Group.
Clear Results Deletes the results of the current design.
Edit Bar Cage Opens the M# Bar Positions table, which is used edit the size and arrangement of reinforcing bars in the column reinforcement bar cage.

The menu is available in the modes:

  • Member Design
  • Slab Design
  • Earthquake