Machine Block ID |
Type a string used to identify the machine block foundation. |
Unit |
Select the units used for specifying length in the input fields. |
Foundation Type |
Choose the foundation type based on the machine configuration supported:
- Single Block
- Combined Block
- Combined Block with Gearbox
|
Machine Type |
Chose the machine type supported. This is used to generate the dynamic loading.
Note: Reciprocating machines may only be supported on single block foundations.
|
Global Reference Point |
Type X, Y, and Z offsets to position the reference point in the Geometry View. |
Resonance Check |
Type a resonance limit (in percent) for machine and foundation frequencies. This limit will be checked for all modes. By default, a resonance limit of 20% is used. |
Meshing Setup |
Select finite element meshing parameters for the automatically generated mesh used in the STAAD analysis. Setting | Description |
---|
Meshing Type |
Select a mesh type based on the element geometry used:
- Quadrilateral - only four-sided elements are used.
- Mixed Quad - four- and three-sided elements are used
|
|
Target Maximum Mesh Size |
Type the largest edge length to be used for mesh elements. |