Origin X / Y / Z |
Specify the origin coordinates for the grid, in the specified units. |
Spacing X / Y |
Specify the uniform spacing to be used (in the length Unit specified for Origin). By default, the grid lines are spaced equally apart. Individual grid line spacing may be edited in the Linear Grid table. |
Lines left/right of origin |
Specify the number of linear grid lines to be generated along the X axis, either side of the origin (Left = negative x axis, Right = positive x axis). |
Lines top/bottom of origin |
Specify the number of linear grid lines to be generated along the Z axis, either side of the origin (top = negative z axis, bottom = positive z axis). |
Grid direction |
Toggles the values displayed in the Linear Grid table for the current grid. Select X or Z to display the grid line spacing along that axis. |
Show Grid |
Select Yes to toggle the grid on after it has been Generated.
Note: The display of grids can be toggled using the Grid Toggle tool found in the Ribbon toolbar
.
|
Save as Default |
Save the linear grid settings as defaults for later use. |
Linear Grid table |
Displays the spacing between grid lines.
Additional grid lines (rows in the table) can be added using the Insert After and Insert Before buttons.
|
Generate Grid |
Click to generate the linear grid with the specified geometry. |
Insert After |
Click to insert new row of data in the table after the selected row. |
Insert Before |
Click to insert a new row of grid data in the table before the selected row. |
Delete |
Click to delete the selected table row(s). |