Hammer Head Pier Page
Hammer head piers are similar to drop cap piers, but have just one (massive) column
Setting | Description |
---|---|
Same as | With the same as option you copy the same parameters from another pier/abutment. |
Cap Geometry Tab
Setting | Description |
---|---|
Top Elevation | Elevation measured at cap top surface. |
Cap Width (w) | Defines the width of the pier cap, for the lower limit as minimum of plate width minus 2 meters and or the upper limit as maximum of plate width plus 6 meters. |
Cap Depth (d) | Defines the thickness of the pier cap. |
Cap haunch depth (hd) | Defines the haunch depth. |
Cap Side Width (sw) | Defines lateral width of the pier cap, up to 2 meters. |