Deck parameters |
Setting | Description |
---|
Same as
|
option copies deck parameters values from one span to another. |
Deck width (w)
|
Width of the cast-in-place deck measured from edge to edge |
Deck depth (d)
|
Thickness of the cast-in-place deck. |
Haunch top width (htw)
|
Width at deck bottom surface of the concrete layer between a superstructure member and a concrete deck. |
Haunch bottom width (hbw)
|
Width at girder top flange surface of the concrete layer between a superstructure member and a concrete deck. |
Haunch depth (hd)
|
Thickness of the concrete layer between a superstructure member and a concrete deck (just for information, it is auto computed as a difference between vertical offset/alignment reference and deck depth; hd=V.offset-(d+h/2)).
|
|
Typical girder parameters |
Setting | Description |
---|
Same as
|
option copies typical girder parameters values from one span to another. |
Number of girders
|
Number of steel girders used for the composite bridge. |
Girder type
|
Sectional shape of the steel girders used. |
Girder ID
|
Select the primary member id to be used (only I-shape is allowed). By right clicking on the arrow, add/edit options will be available and send you to profiles definition menu where you can add new profiles or modify existing ones. |
Alignment reference
|
Typical points in cross-sections to be used for measuring distances between different parts or members; we have 5 options for selection and showed in a picture next to it:
-
TopFlange
-
TopWeb
-
CenterWeb
-
BottomWeb
- BottomFlange.
|
Vertical offset
|
Vertical distance between the reference point of the slab and the reference point on the girder, point that was selected in alignment reference field. |
|