Span
|
Span Selection can be used to select one of the available spans for longitudinal reinforcement definition. |
Same as span selection |
Used to copy the variation from another span to current one. There are 3 different ways to achieve the copying: Plain, Mirrored, Doubly mirrored. Setting | Description |
---|
Plain |
Allows copying the variation from source span into destination exactly the way it was defined in source span. |
Mirrored |
Allows copying the variation from source to destination span, by mirroring its values first. |
Doubly Mirrored |
Allows copying the variation from source to destination span, by mirroring its values first and then applying to destination strip in reverse order. |
|
Reinforcement layout (deck strips) table
|
Setting | Description |
---|
Strip
|
Defines the strip number. |
From/To x/l-B
|
Defines the start and end position of the strip at the beginning of span,relative to the total span length. |
From/To x/l-E
|
Defines the start and end position of the strip at the end of span,relative to the total span length. |
Width-B
|
Strip width and the beginning of span. |
Width-E
|
Strip width and the end of span. |
Same as Strip selection |
Used to copy the set of variations of parameter(s) from a source to destination strip, within current span only. |
|
Strip tabs |
Displays the set parameters for each strip within current span. The variation of any parameter is set using a variation object selected on Variation column. If needed, the defined variation for a parameter can be taken as reversed or not using option on Mirrored column. Setting | Description |
---|
rtran-top
|
Top longitudinal reinforcement group. |
bd-top
|
Bar diameter at deck top. |
bs-top
|
Bar spacing at deck top. |
sd-top
|
Distance from top of slab to the center of the bar, taken as sum of lateral bar diameter, half top bar diameter, and concrete cover. |
rtran-bottom
|
Bottom longitudinal reinforcement group. |
bd-bot
|
Bar diameter at deck bottom. |
bs-bot
|
Bar spacing at deck bottom. |
sd-bot
|
Distance from bottom of slab to the center of the bar, taken as sum of lateral bar diameter, half bottom bar diameter, and concrete cover. |
As(cm2/m)
|
Area of the bar divided by the bar spacing. |
View sketch
|
Graphical preview of the strips and separate information about top/bottom reinforcement. |
|