Girder ID
|
Select the primary member id to be used (only I-shape is allowed). By right clicking on the arrow, add/edit options will be available and send you to profiles definition menu where you can add new profiles or modify existing ones. |
Girder type
|
Sectional shape of the steel girders used. |
Spacing_B
|
The distance from the CL of selected Girder to the CL of the girder to its left at beginning of span. For the first girder, enter the distance from the left edge of the bridge to the centerline of the first girder. |
Spacing_E
|
The distance from the CL of selected Girder to the CL of the girder to its left at span end. For the first girder, enter the distance from the left edge of the bridge to the centerline of the first girder. |
V.Offset_B
|
Vertical distance at beginning of span between the reference point of the slab and the reference point on the girder, point that was selected in alignment reference field. |
V.Offset_E
|
Vertical distance at span end between the reference point of the slab and the reference point on the girder, point that was selected in alignment reference field. |
H.Offset_B
|
Horizontal distance from the CL of selected Girder to the CL of the Bridge at beginning of span. |
H.Offset_E
|
Horizontal distance from the CL of selected Girder to the CL of the Bridge at beginning of span. |
Align.reference
|
Typical points in cross-sections to be used for measuring distances between different parts or members; we have 3 options for selection and showed in a picture next to it: Top,, Center, Bottom.The drawing shows the plan view of the span on which you are positioned with the piers at begin and end of span in the darker gray color, the lighter gray represents the deck surface. The selected girder from the upper table is highlighted in blue. |