General Page SniP
General page provides information regarding the chosen design code, different types of alignment input, and computation models.
Setting | Description |
---|---|
Design Code | Shows the selected design code that was chosen in Project Settings/General Options. |
Wind area | Characteristic value of wind pressure available in Table 11.1 from SP 20.13330 - depending on wind areas. |
Terrain profile type | Area of wind loads according to Table 11.2 in SP 20.13330 |
Soil profile type | Ground type for type of response spectra graphic. |
Seismic Zone | Seismic area as defined in the National Annexes. |
Relative Humidity | Annual average ambient Relative Humidity in percent for Creep/Shrinkage. |
Average Temperature | Average temperature used only for Creep/Shrinkage calculation. |
Alignment Type | Allows choosing from four types of alignment definition:
|
Alignment Reference |
|
Computation model |
|