LC (Selection of load case)
|
Name of loadcase, for which the result values will be shown Setting | Description |
---|
Elem |
only element results available |
|
ElemGrp (Selection of a object group)
|
If the elements have been arranged in groups, the presentation can be restricted to the elements, nodes or tendons of a selected group. Default (no group selected): Presentation of all element groups
|
Elem / Node (Selection of an object)
|
Selection of a certain element or node for being presented in the visible part of the table |
Ndiv Pnt
|
Option for presenting the values in any subdivision points in addition to the values at element ends |
Choice Results: Total/Primary/Secondary
|
For load cases which have a primary part (internal equilibrium state) such as pre-stressing, creep and shrinkage, non-linear temperature distribution. Setting | Description |
---|
Total |
stresses due to total internal forces are presented (primary + secondary) |
Primary |
stresses due to primary part of the internal forces are presented |
Secondary |
stresses due to secondary part of the internal forces are presented |
|
Choice Results: Reference-Set
|
Stress calculation performed for the stress points of the selected reference set |
Result table stresses
|
Setting | Description |
---|
Elem |
Element number |
Nod |
Node number |
x/l |
Position of the result point in the element |
CS type |
Cross-section type for stress calculation |
### |
Longitudinal stress in the reference point (stress point) ### |
|
Bottom buttons
|
Setting | Description |
---|
Force |
Switch to the presentation of internal forces |
Displ |
Switch to the presentation of deformations (displacements and rotations) |
Diagram |
Graphic presentation of the internal force diagram |
Print |
Alpha-numeric output of the current result list (or of a part of it) |
Max |
Search for the maximum value of a certain result component |
Min |
Search for the minimum value of a certain result component |
|