LC (Selection of load case)
|
Name of loadcase, for which the result values will be shown |
Selection of the object category
|
Setting | Description |
---|
Elem |
Presentation of internal forces of structural elements |
Node |
Presentation of support forces of nodal support springs |
Tendon |
Presentation of tendon forces (Selective field Tnd for selecting the presented tendon). |
|
Tend
|
Only for category Tendon: No. of the tendon profile for result presentation |
ElemGrp (Selection of a object group)
|
If the elements have been arranged in groups, the presentation can be restricted to the elements, nodes or tendons of a selected group. Default (no group selected): Presentation of all element groups
|
Elem / Node (Selection of an object)
|
Selection of a certain element or node for being presented in the visible part of the table |
Global / Local
|
Setting | Description |
---|
Local |
Internal forces in the local coordinate system of the structural element (also tendon forces) or in the local system of the nodal support spring |
Global |
Internal forces in the global coordinate system
- Elements: The internal forces are calculated in the local system with applying the standard sign rules, and then transformed into global directions with applying a standard direction transformation procedure.
- Tendon: The forces in longitudinal direction of the tendon are presented
|
|
Ndiv Pnt
|
Option for presenting the values in any subdivision points in addition to the values at element ends |
Choice Results: Total/Primary/Secondary
|
For load cases which have a primary part (internal equilibrium state) such as pre-stressing, creep and shrinkage, non-linear temperature distribution. Setting | Description |
---|
Total |
the total internal forces are presented (primary + secondary) |
Primary |
primary part of the internal forces is presented |
Secondary |
secondary part of the internal forces is presented |
|
Choice Type: Normal/Split/Joined
|
Related to composite elements or partial elements of composite elements only: Setting | Description |
---|
Normal |
basic calculation results are presented (i.e. results of the elements, which formed the active system in the respective load case calculation) |
Split |
respective partial internal forces are presented for the partial elements of the active composite elements |
Joined |
equivalent results of composite elements for load cases calculated for respective partial elements before the composite state was activated |
|
Result table of internal forces
|
Setting | Description |
---|
Elem |
Element number |
Nod |
Node number |
x/l |
Position of the result point in the element |
N |
Normal force or spring force in x direction |
Qy |
Shear force or spring force in y direction |
Qz |
Shear force or spring force in z direction |
Mx |
Torsional moment or spring moment around x |
My |
bending moment or spring moment around y |
Mz |
bending moment or spring moment around z |
|
Bottom buttons
|
Setting | Description |
---|
Displ |
Switch to the presentation of deformations (displacements and rotations) |
Stress |
Switch to the presentation of stresses in the defined stress points |
Diagram |
Graphic presentation of the internal force diagram |
Print |
Alpha-numeric output of the current result list (or of a part of it) |
Max |
Search for the maximum value of a certain result component |
Min |
Search for the minimum value of a certain result component |
|