From/To/Step
|
Element series, for which the section properties are input/modified. |
Element type
|
Type of the element(s) (see Structure > Elements > Info ) |
Aero class
|
Aero class of the element describing the wind behavior |
EccType
|
Type of eccentricity definition Setting | Description |
---|
YoZo |
no cross-section eccentricity considered (reference point = CoG) |
YlZo |
cross-section eccentricity in y direction considered |
YoZl |
cross-section eccentricity in z direction considered |
YlZl |
cross-section eccentricity in y and z direction considered |
|
Radio button Cross-section/Specific value
|
Setting | Description |
---|
Cross-section |
The element cross-section is defined by assigning geometrically defined cross-sections (named objects) at begin and end of the element. |
Specific value |
The element stiffness is defined by direct specification of the relevant parameters (CS area, moments of inertia, etc.) |
|
Cross-section Begin/End
|
Setting | Description |
---|
CS |
Name of the cross-section at begin or end of the first element of the series |
Step-Type |
Step in the variant number of the cross-section name from element to element in the series |
|
Specific values
|
Setting | Description |
---|
Ax |
Cross-section area of the element |
Ay, Az |
Shear area for shear in y or z direction respectively |
Ix |
Torsional moment of inertia |
Iy, Iz |
Moments of inertia for bending around y and z respectively |
U |
Outside Perimeter length of the cross-section (used for creep calculation) |
UIN |
Any inside perimeter length in hollow box sections |
|