Add/View Loads
Add/View Loads allows user to create a new load sets or load cases using 3D-graphical selection in the main window. User can also view loads including traffic loads and wind gird in the main window.
Setting | Description |
---|---|
Display | Display loads (load set and load case), traffic, and wind grid. |
Add Loads |
|
1- Select elements/nodes | |
3D Selection |
There are 3 options available: 3D Box Selection which user can performs a selection of all elements inside the cube defined as follows:
Rubber band Selection which user can performs a selection of all
elements inside the block defined as follows:
Element Selection which user can performs a selection of all
elements on a linear selection of elements, defined as follows:
|
Side Views | Adjust the view in different direction: South, North, East, West and Top. |
Structure | Enable structural components which need to be included in the 3D Selection. |
Actions |
|
Parts | Only those parts which are enabled will be selected. The same behavior will occur with selection of Deck or Pier elements. |
2- Select Load Set/Load Case | |
|
|
3- Assign Load Type | |
Assign from the load selection by double-clicking on the desired load type |
After these steps, a newly created load will be displayed. Note: The "Display Loads" checkbox should be enabled to see the loads