Envelope
|
Envelope/superposition file to be added to the RmSet (s. examples) |
Result for given envelope/envelope row
|
Result of previously specified envelope(s) (s. above) to be added to the RmSet (s. examples) |
Envelope result
|
Result of one envelope row to be added to the RmSet (s. examples) |
Schedule
|
Schedule name (can be left blank) |
Envelope file
|
Superposition file name (*.sup) and superposition row
- MinVx, ..., MinMz Minimum rows of superposition
- MaxVx, ..., MaxMz Maximum rows of superposition
- * All rows (s. examples)
- ALLF Alle Zeilen MinNx,...,MinMz,MaxNx,...,MaxMz (s. example) When the RmSet is saved, this row has been splitted into 6 rows.
Stresses
- Min Overall minimum
- Max Overall maximum
- MinE Overall minimum, special (maximum compression)
- MaxE Overall maximum, special (minimum tension)
- Diff Stress amplitude
|
Result component
|
Result component to be output: Vx, ..., Mz . Setting | Description |
---|
Stress |
Stress for the specified stress point |
TAUY, TAUZ |
Shear stresses |
SIGI,SIGII, SIGIII |
Principal stresses acc. to chosen mode (s. 'General') |
Reinforcement stress |
for the specified attribute set |
Tendon stress |
for the specified tendon |
Elastic strain |
The function allows for presenting the longitudinal strain in the different stress points in the cross-section.
Note: The presented strain value is only the linearly elastic part of the total strain, i.e. the value recalculated from element forces by using the E-Modulus.
The values do not contain temperature strains, viscous strains due to creep and shrinkage and any non-linear strain parts due to material non-linearity.
|
All internal forces |
6 rows for all internal forces will be added A row with key 'Nx-Mz' will be inserted in the list
When the RmSet is saved this row has been splitted into 6 rows (1 per force)
|
|
Stress point
|
Stress point the stress wanted to be output for |
Attribute set
|
Attribute set the reinforcement stress wanted to be output for |
Tendon number
|
Tendon the tendon stress wanted to be output for |