Aero Classes > New/Modify/Copy

View and modify basic information describing the Aero Class

Setting	Description
Aero CL No.	Identification number for this Aero Class
Ref.CS	Cross Section to use for calculation of aerodynamic coefficients with CFD and automatic determination of dimensions for wind check actions
Description	General description for Aero class
Table / Single Values	Table: Steady state coefficients are given by pairs (angle, value) Single Values: Steady state coefficients are determined by linear approximation via value and slope at main direction Note: Selection is only available when creating Aero Class
Non-symmetric	Input for + and - direction will be needed Note: Selection is only available when creating Aero Class
Factor	Separate additional multiplication factors for X, Z and Y direction
DragX	Drag coefficient in element direction
Normalization factors for wind forces, Strouhal numbers and other frequencies (separately for Z and Y direction)	No: No additional normalization b: Coefficients related to width 'b' h: Coefficients related to height 'h' bb: Coefficients related to area 'bb' hh: Coefficients related to area 'hh' bh: Coefficients related to area 'b*h'