Ele-From
|
First element in series |
Ele-To
|
Last element in series |
Ele-Step
|
Element step for the series |
Nod No 1 to 9
|
Node numbers defining the element. Node numbers must be defined in an anti-clockwise direction.
|
Series
|
Modification can be done for element series |
Elem-type
|
Element type (bending/shear lag) can be modified |
Reduct.factor
|
Shear modulus(G) reduction factor can be modified |
Point input
|
Node definition for certain element can be modified |
Unit No.
|
Assignment to the certain unit |
Normal bending element
|
The element will be considered for bending and shear stresses calculation |
Shear lag - Y direction
|
The element will be considered only for shear stresses calculation for Y direction |
Shear lag - Z direction
|
The element will be considered only for shear stresses calculation for Z direction |
Red-Mx
|
Shear modulus(G) reduction factor, caused by Mx |
Red-Qy
|
Shear modulus(G) reduction factor, caused by Qy |
Red-Qz
|
Shear modulus(G) reduction factor, caused by Qz |
Unit No.
|
Number of unit, which the elements should be assigned to |