first column |
Double-clicking the first column opens the Selection dialog, which is used to the type of the support:
- pier (Spring-0 at the bottom of the pier). The designation for the pier supports is Pier[number]
- span (Spring-0 at the begin or end of a span). The designation for the supports in spans Span[number]
- abutment (Spring-0 and two abutment springs at the begin or end of a span). The designation for the abutments Abut-Span[number]
|
Position |
Position, where the support shall be situated. For piers it is always switched to BOTTOM, for spans it can be set to BEGIN or END. |
Element |
Number of the ground spring element for pier, span, or abutment. The numbering of the three springs of an abutment is based on the input of the ground spring (e.g., an input of 3000 will create abutment springs 3000 (0-Spring) and 3001, 3002). |
CX / CY / CZ / CMX / CMY / CMZ / DAlpha1 / DAlpha2 / DBeta |
Input of the spring constants of the supports. (For further help to this topic refer to RM Bridge User Guides). |