Adding a Concrete Slab Property
-
Select the Concrete Slab System tab.
-
Type a label.
-
Type the concrete thickness in the Concrete Slab Thickness edit box.
Note that this is the total slab thickness.
-
Type the f'c.
-
Type the Unit Weight.
-
Type the Unit Weight for Self-Weight.
This is used in the calculation of the self-weight if that option is selected.
-
Type the Poisson's Ratio.
-
Type the Cracked Factor - Bending.
-
Type the Cracked Factor - Diaphragm.
This will only be used if the Diaphragm is specified as Semirigid in RAM Frame.
-
Select an Elastic Modulus setting and enter a value if necessary.
-
Click Add.
You will then see the newly created Decking Property entered into the list box.