This output provides a listing of every Westok Cellular Beam design in the structure. For each beam, there are two sections of output: Design and Detailing.

The Design section lists the following information:

• The beam ID number
• The span length
• The nominal yield strength py
• The Westok Cellular Beam size
• The beam depth
• The required camber
• The required number of studs

An asterisk "*" after the beam size indicates that the beam is over‑stressed. This can occur with user-selected sizes. A "#" after the beam size indicates that the beam is over‑deflected. A "u" after the size indicates that the user has assigned the size, hole configuration, and/or studs shown.

The Detailing section lists the following information:

• The beam ID number
• The Root Beam size from which the Westok Cellular Beam is to be manufactured. The root beam for the top half and the bottom half are both listed.
• The Tee Depth for both the top and bottom tee.
• The Westok Cellular Beam size
• Cell Diameter.
• Cell Pitch.
• Location of first Cell (from left end).
• Location of last Cell (from right end).
• Infilled Cells, if any, listed by cell number.