Set Defaults |
Opens the Modeler
Defaults dialog, which is used to change the default
values that appear in the dialog boxes for the current model. |
Change Units |
Opens the Units Selection dialog,
which is used to change the Current Units in the model. |
Reference Layout
Types |
Opens the Reference Layout Types
dialog, which is used to |
User
Interface |
Opens the User Interface Options
dialog, which is used to |
Set Show Options |
Opens the Set Show Options
dialog, which is used to selectively show modeling attributes
graphically. |
Show Sizes |
Turns the display of the assigned member sizes on or
off in the current view. |
Show Size Restrictions |
Turns the display of the assigned depth and width
restrictions on or off in the current view. |
Show Member Lengths > |
Actual |
Used to display actual beam, horizontal
brace, and top of wall lengths, taking into account sloping
members. |
Projected |
Used to display beam, horizontal brace, and
wall lengths projected in plan view. |
Show Property > |
Column, Beam,
Wall, Foundation, or
Frame Numbers |
Used to display various member numbers. |
Column & Wall,
Foundation, or Stub Cantilever
Elevations |
Used to display the elevations of columns & walls,
foundations, or stub cantilevers. |
Show Live Load Reduction
> |
Column, Beam,
Wall |
Used to display the live load reduction method or value
for columns, beams, or walls. |
Show Web Openings |
Used to display the location of web openings (and
stiffeners) on beams |
Show Brace Points |
Used to display the user defined brace points for beams. |
Show Fixity |
Used to display the end fixity conditions of members for
the major, minor and torsional axes. |
Show Cell
Assignments |
|
Show Wall > |
Primary Face |
Used to add arrows pointing away from the wall primary
face in the current view. |
Exposure > <list> |
Used to show the exposure categories on each side of
walls in the current view. |
Scale Text |
Opens the Set Text Scale dialog,
which is used to adjust the size that the text labels appear on the
screen. |
Renumber
Members |
Used to renumber the floor members using the software’s
numbering scheme. |
Set Snap
Points |
Opens the Set Snap Points dialog,
which is used to |