The program automatically determines default bracing for RAM Steel Column based on the options specified. Options are provided for deck to automatically brace the column. Additionally, beams framing into columns may cause the columns to be braced. The maximum angle (0 - 90 degrees) for which a beam braces a column may be specified in the edit box provided. If the angle between a given column face and the beam exceeds the value specified, the beam does not provide bracing to that column face. For a complete explanation of column bracing, see the Technical Notes chapter in the RAM Steel Column manual.

To change the bracing criteria, click on the desired bracing options and/or enter a new maximum angle in the edit box.

Click the Cancel button to exit the dialog without saving the changes made.

To accept the changes, click the OK button. A warning message will be displayed on the screen stating that the columns must be re-framed and redesigned with this new criteria. Clicking OK will initiate the re-framing process. Clicking Cancel will terminate the command, returning you to RAM Steel Column.