RAM Concrete Wall Reports
RAM Concrete Wall output is designed to provide the engineer with all necessary data for the review of calculations for concrete wall design. The reports have been designed to duplicate the information provided in hand calculations.
Below is a summary of the reports available in RAM Concrete Wall module. A more complete explanation of the output follows.
| Setting | Description |
|---|---|
| Wall Design Group Properties | This report correlates the geometric data from the modeler with concrete wall-specific data. |
| Wall Panel Properties | A list of wall panels, their geometric data and material properties. |
| Section Cut Forces | This report is available for either horizontal or vertical section cuts. It lists the forces on each section cut in the section cut's local axis. |
| Section Cut Segment Forces | Forces acting on each horizontal section cut segment reported in the plan of the section cut segment. |
| Material Takeoff | The total volume and weight of concrete and reinforcing in walls. |
| Section Cut Design Summary | A summary of the design checks and reinforcement for a Section Cut. |
| Wall Panel Reinforcement | A list of the reinforcement designed for each wall panel. |
| Coupling Beam Design Summary | A summary of the design checks and reinforcement for a Coupling Beam. |