The user can designate to have the program calculate the sway state for each load combination (refer to Sections 2.5.5.1 and 2.6.5). With this designation the program will calculate λ_cr based on the current combination for the axis of the member (refer to 3.2.3.4). If λ_cr is determined to be less than 10.0 the

member will be considered sway-sensitive in that axis for THAT one combination. For each load combination the sway state will be determined and may differ from other load combination sway-states.

If the user selects to have the program calculate the sway state per load combination, and if P-Delta is not run but a λ_cr < 4.0 is calculated, the program will issue a warning following a design-all suggesting that P-Delta be performed.