This output provides a listing of every steel joist selection and designation in the structure. The joists are listed according to type (Standard, Girder, and Special). For each joist, specific important information is provided:

• The joist ID number
• The span length

The design loads for Standard Joists, Constant Shear Joists and Joist Girders:

• WDL represent the uniform Dead Load
• WLL represents the uniform Live Load
• WTL represents the uniform Total Load
• Wmax represents the maximum uniform load
• Pmax represents the maximum concentrated load
• Vmax represents the maximum shear
• Mmax represents the maximum moment
• PDL represents the concentrated Dead Load
• PLL represents the concentrated Live Load
• PTL represents the concentrated Total Load
• The maximum and minimum moments for Special Joists
• The joist size

An asterisk after the joist size indicates that the joist is inadequate. This can occur with user-selected sizes. A "u" after the size indicates that the size shown has been assigned by the user. With this output every joist designation in the structure can quickly be reviewed.