Westok Cellular Beam Design Summary
This output provides a listing of every Westok Cellular Beam design in the structure. For each beam, there are two sections of output: Design and Detailing.
The Design section lists the following information:
- The beam ID number
- The span length
- The nominal yield strength py
- The Westok Cellular Beam size
- The beam depth
- The required camber
- The required number of studs
An asterisk "*" after the beam size indicates that the beam is over‑stressed. This can occur with user-selected sizes. A "#" after the beam size indicates that the beam is over‑deflected. A "u" after the size indicates that the user has assigned the size, hole configuration, and/or studs shown.
The Detailing section lists the following information:
- The beam ID number
- The Root Beam size from which the Westok Cellular Beam is to be manufactured. The root beam for the top half and the bottom half are both listed.
- The Tee Depth for both the top and bottom tee.
- The Westok Cellular Beam size
- Cell Diameter.
- Cell Pitch.
- Location of first Cell (from left end).
- Location of last Cell (from right end).
- Infilled Cells, if any, listed by cell number.