For each steel beam, the following information is provided:

• The beam ID number
• The span length
• The maximum positive moment (M, Mu, Mfx, Mx, or MSd, depending on the Code selected)
• The maximum negative moment (M, Mu, Mfx, Mx, or MSd)
• The effective section modulus (Seff for ASD only)
• Nominal Moment Capacity (Mn, Mrx, Mcx, or MRd)
• The nominal yield strength (Fy, py, or fy)
• The beam size
• The required number of studs

An asterisk after the beam size indicates that the beam is over‑stressed. This can occur with user-selected sizes. A "#" after the beam size indicates that the beam is over‑deflected. A "u" after the size indicates that the user has assigned the size and/or studs shown. With this output every beam design in the structure can quickly be reviewed.