Load Case Type Labels
In addition to the user-defined load case labels, load cases are assigned load case type labels to further identify the load cases. The following is a key to deciphering the type labels:
RAMUSER | This type label is assigned to the gravity load cases generated from the gravity loads in RAM Modeler. |
RAMUSERNODAL | This type label is assigned to the nodal load cases created in RAM Modeler. |
Wind or W | Wind load |
EQ or S | Seismic load |
NL | Notional Load |
Dyn | Dynamic load |
O | "Other" load |
V | Virtual load |
User | User-specified story forces |
X | X axis |
Y | Y axis |
X' | X axis with the coordinate axes rotated. |
Y' | Y axis with the coordinate axes rotated. |
+E | Plus eccentricity |
-E | Minus eccentricity |
NoE | No eccentricity |
CW | Clockwise |
CCW | Counter-Clockwise |
F | Special Provisions for Member Forces |
Drft | Special Provisions for Drift |
Fdtn | Special Provisions for Foundation Forces |
CQC | CQC Modal Combination |
SRSS | SRSS Modal Combination |
CSA | Construction Stage Analysis |