Edit span segment with Span Boundaries and Strip Boundaries
-
Select the span segment between grid B3 and C3 (the highlighted line in the first figure in "Generate the longitude strips").
-
Right click on the plan and choose Selection Properties from the popup menu.
-
Change Span Width Calc to Manual, and click OK.
-
Select the Span Boundary Polyline tool (
).
-
Click at point A as shown in the previous figure.
-
Click at point B.
-
Right-click, and click enter.
-
Click at point C and D.
-
Right-click, and click enter.
-
Select the Strip Boundary Polyline tool(
).
-
Click at point E as shown in the previous figure.
-
Click at point F (the corner of the opening) and point G (another corner).
-
Right-click, and click enter.
-
Select the span segment between grid B3 and C3.
-
Click the Generate Selected Strips tool (
).
