Max Service
- This is intended for service load combinations where ψ = 1.0.
- Tendons are considered as an external load (and the balance loading is assumed to be included in the load factors).
- The reinforcement type (as defined in the design section or design strip segment) is considered (PT or RC).
- The stress levels in the structure are determined by the moment envelope for the rule set (reinforcement may be required on both faces).
- Code Rules are applied as shown in the following table.
Table 1. Maximum service rule mapping
| Design System |
RC |
PT
|
|
Beam
|
8.6.1 (portions) |
(none) |
|
One-Way Slab
|
9.4.1 (portions) |
(none) |
| Two-Way Slab |
9.4.1 (portions) |
(none) |
