- Tendons are considered as an external load (and the balance loading is assumed to be included in the load factors).
- The reinforcement type (as defined in the design section or design strip segment) is considered (PT or RC).
- The stress levels in the structure are determined by the moment envelope for the rule set (reinforcement may be required on both faces).
- Code Rules are applied as shown in the following table
Table 1. Initial service rule mapping
Design System
|
RC |
PT |
Beam
|
(none) |
18.3.1.1 and 18.3.1.3
|
One-Way Slab |
(none) |
18.3.1.1 and 18.3.1.3
|
Two-Way Slab
|
(none) |
18.3.1.1 and 18.3.1.3
|
Note: 18.3.1.1(c) is not considered. 18.3.1.1(b) is considered in all cases for tension.