Specify the reinforcement parameters
- Set the top reinforcing bar to #5 [N16 for AS3600; T16 for BS8110 and IS456; H16 for EC2].
- Set the bottom reinforcing bar to #4 [N12 for AS3600; T12 for BS8110 and IS456; H12 for EC2].
- Set the top and bottom reinforcement clear cover to 1 inch [25 mm].
- Check the Perform punching shear checks box.
- Set Cover to CGS to 1.625 inch [41 mm].
- Click Next to proceed to the Completion page.