Partially calculating the results

Do either of the following:

Click Calc Partial ()

Select Process > Calc Partial

The slider on the left side of the Calc dialog box determines the level to which RAM Concept performs the calculations. The options are:

Setting	Description
Through analysis	Calculations are performed up to and including the global slab analysis (slab moments deflections, etc.) and the strip and section forces.
Through design	RAM Concept performs the design of strips, sections and punching shear checks, in addition to all the Through analysis calculations.
Through layout	RAM Concept performs the layout of program reinforcement on the Reinforcement layer, in addition to all the Through design calculations.
All	RAM Concept performs the detailing of program reinforcement into individual bars (viewable in perspectives), in addition to all the Through layout calculations.

The checkboxes on the right side of the Calc dialog window provide options on how RAM Concept performs the calculations. The options are:

Setting	Description
Skip warnings	Optional warnings do not stop the calculations, but are added as notes to the Calc Log. This setting is off by default.
Calculate only out-of-date items	Existing calculation results are not replaced by new calculations unless RAM Concept detects that the existing calculations are out-of-date. This setting is on by default.
Warnings invalidate calculations	Previous calculation warnings are considered to invalidate their associated results, causing the re-calculation of the item that caused the warning. This setting is on by default.