Define the wall location and properties
-
Turn on Snap Orthogonal ().
-
Double click on the Wall tool ().
-
In the Default Wall Properties dialog box:
-
Choose a Concrete Strength of 3000 psi [20 MPa for AS3600; C20/25 for BS8110 and EC2].
-
Set Height to 10 feet [3 m].
-
Set Support Set to "Above".
-
Set Thickness to 12 inches [300 mm].
-
Uncheck "Shear Wall".
-
Uncheck "Fixed Near" and "Fixed Far".
-
Click OK.
-
Define each wall by snapping to the start and end points of the wall centerlines shown on the CAD drawing.