Complete the steps in "Define the latitude tendons Pt. 2" before proceeding.
With the Select Connected Tendons tool () selected, double-click the tendon on grid B.
Right click on the plan and choose Selection Properties from the popup menu.
In the Properties dialog box, change Strands Per Tendon to 25, and click OK.
The latitude tendons are drawn but you need to adjust a number of profile points. Any profile point at the end of a tendon should be at the mid-depth of the 250 mm slab.
With the Selection tool (), select all of the terminated tendon segments, other than those over a drop cap, by:
Double clicking at grid intersection B-1.
Hold the <Shift> key down and double click at B.8-1.
Hold the <Shift> key down and double click at C-4.
Hold the <Shift> key down and double click at D-2.
Hold the <Shift> key down and double click at D-4.
Right click on the plan and choose Selection Properties from the popup menu.
In the Properties dialog box, set Profile at end 1 to 125 mm and click OK.
With the Selection tool (), select all of the terminated tendon segments over a drop cap, by:
Double clicking at grid intersection A-1.
Hold the <Shift> key down and double click at A-3.
Hold the <Shift> key down and double click at B-5.
Proceed immediately to "Define the latitude tendons Pt. 4".
) selected, double-click the tendon on grid B.
), select all of the terminated tendon segments, other than those over a drop cap, by: