Initial Service ("Transfer")
- Tendons are considered as an external load (and the balance loading is assumed to be included in the load factors).
- The reinforcement type (as defined in the design section or design strip segment) is considered (PT or RC).
- The stress levels in the structure are determined by the moment envelope for the rule set (reinforcement may be required on both faces).
- Code Rules are applied as shown in the following table.
Table 1. Initial service rule mapping
|
Design System
|
RC |
PT |
| Beam |
(none) |
4.3.5.1
4.3.5.2
|
| One-Way Slab |
(none) |
4.3.5.1
4.3.5.2
|
|
Two-Way Slab
|
(none) |
4.3.5.1
4.3.5.2
|
