RAM Concept Help

Define the longitude profile polylines Pt. 1

  1. Double click the Profile Polyline tool () to edit its default properties.
  2. In the Default Profile Polyline Properties dialog box:
    1. Set Elevation to 5 inches.
  3. Turn off Snap Orthogonal ().
  4. Draw a profile polyline:
    1. Click at the intersection of the slab edge with line B.8 near line 1.
    2. Click at the center of the column at B.8-1.
    3. Click at the center of the column at C-2.
    4. Right click and select Enter.
  5. Draw a profile polyline:
    1. Click at the intersection of the slab edge with line B near line 1.
    2. Click at the center of the column at B-2.
    3. Right click and select Enter.
  6. Draw a profile polyline:
    1. Click at the intersection of the slab edge with line A near line 1.
    2. Click at the center of the column at A-2.
    3. Right click and select Enter.
Proceed immediately to "Define the longitude profile polylines Pt. 2".
Parent topic: Define the post-tensioning