RAM Concept Help

Specify the reinforcement parameters

Enter the reinforcement parameters on the Reinforcement page.

Set the reinforcement as follows

  1. Set the top reinforcing bar to #5 [N16 for AS3600; T16 for BS8110 and IS456; H16 for EC2].
  2. Set the bottom reinforcing bar to #4 [N12 for AS3600; T12 for BS8110 and IS456; H12 for EC2].
  3. Set the top and bottom reinforcement clear cover to 1 inch [25 mm].
    Note: Strip Wizard does not differentiate between cover to tendons and reinforcement bar.
  4. Check the Perform punching shear checks box.
  5. Set Cover to CGS to 1.625 inch [41 mm].
  6. Click Next to proceed to the Completion page.
Parent topic: Strip Wizard Tutorial