Used to convert curved elements and Bspline curves to lines, a line string, a stream curve, arcs, or points.
You can access this toolbar from the following:
 Ribbon:
 Toolbox:
Curve Utilities
Setting  Description 

Method 
Sets how the dropped element is constructed.
 Equal Arc Length — The Bspline curve is evaluated evenly along the arc. Each segment has the same arc length, as defined by the value for Number.
 Equal Chord Length — The Bspline curve is evaluated at a given number of points such that the distance between each successive point is the same.
 Fixed Chord Length — The distance between each pair of successive points evaluated is the same as the chord length.
 Max. Chord Height — The maximum chord height for all of the line segments is less than the Chord Height.
 Equal Parameter Length — The Bspline curve is evaluated evenly in the parameter space by the Number value.

Facet To 
Sets the element type to which the selected Bspline curve is converted.
 Line String — The Bspline curve is dropped to a line string.
 Lines — The Bspline curve is dropped to a number of connected lines.
 Stream Curve — The Bspline curve is dropped to a stream curve.
 Arcs — The Bspline curve is dropped to a number of connected arcs.
 Points — The Bspline curve is dropped to a number of points.

Number 
Sets the:
 Number of points when Method is set to Equal Parametric Length.
 Arc length when Method is set to Equal Arc Length.

Keep Original 
If on, the original Bspline curve is retained. 