Device BOM Assignment
If you created a device ID in the BOM Explorer that is not associated with an existing symbol, use this dialog to assign that device to an existing symbol.
The following dialog opens.
|Filter||This dialog lists device IDs created in the BOM Explorer that are
unassigned to symbols. You can filter this list by selecting a parameter (such
as Installation or Device Tag) in the
Filter drop-down list, entering a filter value in the
Like field, and then selecting the
Use the Save button to save this filter. Use the Clear button to remove an existing filter.
|Device IDs||The device IDs created in the BOM Explorer are listed in the grid. Select an item to assign to the existing symbol.|
|Drawing Device ID||If you want to keep the device ID that the symbol already has, select the Drawing Device ID option (The selected item will still be removed from the pick list because it will be placed on the current symbol).|
|BOM Explorer ID||If you want the symbol to receive the device ID from the list in the dialog, select the BOM Explorer ID option.|
|Replace||If the selected item in the list has attributes assigned, they will be shown in the lower part of the dialog. If you wish this attribute value to be assigned to the existing symbol, select the Replace check-box.|
Once you have defined how to assign the Device ID, select OK to assign the selected item to the symbol in the drawing. Select Cancel if you do not wish to make an assignment.