Select the
Insert
Field option from either the
2D
Design or
Panel
Design ribbon.
On the command line, you will be prompted to define the
first corner and opposite corner of the field in the desired area of the
drawing.
Select the corners of the new field. A box indicates the field
area.
You are prompted to
Locate the text position. This means to select a point
near the field where the field's Installation/Location name will be printed.
Use the mouse to point and click to select the point. The
Field Parameters dialog will then appear.
Use the drop down boxes to select values for the
Installation and
Location fields. This can be an existing
installation/location, or one that has not yet been used.
(Optional): The
Rename Existing Symbols to Inst/Loc of the
Field check box determines whether or not any existing symbols in
the field area will be renamed (reassigned) to the field's installation and
location. When the check box is on, existing symbols are renamed.
Use the set of fields at the bottom of the dialog to determine the
characteristics of the text that will label the field on the drawing.
The
Text-Offset values indicate the distance from the
field insertion point (first corner) to the insertion point (write position) of
the text. These values can be altered if desired.
The
Line Color and
Line Type fields allow the characteristics of the
field border line to be set.
When the desired values are entered, select the
OK button to complete creation of the field.