HandleExceptions

By default, exceptions will be logged. Uncomment this setting if you want the system to log information about unhandled exceptions.

ProccesorCount

By default, all available processors are used. If you want to limit the number of processors used, uncomment this setting and after the = character, enter the amount of processors you want to be used. If set, the process is bound to the first N processors, where N is the value you specified.

MinWorkingSet

By default, there is no minimum workingset. To define the minimum workingset for the process, in bytes, uncomment this setting and after the = character, enter a value for the minimum workingset.

MaxWorkingSet

By default, there is no maximum workingset. To define the maximum workingset for the process, in bytes, uncomment this setting and after the = character, enter a value for the maximum workingset.

ThreadStackSize

By default, the thread stack size used for created threads is 256k. To set some other thread stack size, uncomment this setting and enter another value after the = character.

DisableLowFragHeap

By default, the low fragmentation heap option is enabled. Uncomment this setting to disable the low fragmentation option for heap allocations.

LogConfig

By default, the dmskrnl.log.xml is used for logging. To use another configuration file, uncomment this setting and specify the full path to and including the alternative configuration file.

LogBufferSize

The default size of the internal buffer used for logging is 1024. To use a different value, uncomment this setting and enter another value after the = character. The value you enter must be a positive integer. Note that excessively large values may have an adverse effect!

ThreadMonitorInterval

By default, the interval used to monitor service threads is 30 seconds. To change the interval, uncomment this setting and specify a different value (in seconds) after the = character.

ThreadRestartLimit

By default, the number of times a service thread can terminate unexpectedly is 3 times. To change the number of times a thread service can terminate unexpectedly, uncomment this setting and enter another value after the = character.

IPV6Enabled

By default, Internet Protocol version 6 (IPv6) addressing support is disabled. To enable it, uncomment this setting and after the = character, set the value to 1.

IPV6Preferred

By default, Internet Protocol version 6 (IPv6) addressing is not preferred for server to server connections. To make it preferred, uncomment this setting and after the = character, set the value to 1.

DisableCancelableQueries

By default, cancelable queries support is enabled for the server. To disable it, uncomment this setting and after the = character, set the value to 1.

CancelableQueriesItemCount

By default, cancelable queries will return results in data blocks of 1024 items at maximum. To change the maximum count of items returned in the data blocks, uncomment this setting and specify a different value after the = character.

cancelableQueriesTimeout

By default, cancelable queries will try to collect CancelableQueriesItemCount items in 30 seconds (the default timeout setting). If timeout is reached, the server returns what it has up to the point of timeout. To change how many seconds may pass before timeout is reached, uncomment this setting and enter a different value (in seconds) after the = character.