Display classes list
|
- blank column –
lists the serial number of classes.
- Class
Name column – lists the available display classes. A desired class
may be selected. You can edit the content of the field Class Name by
double-clicking it. In the field Status you see if the elements are currently
shown (On) or hidden (Off).
- Status column –
Lists the current status of a display class. You can toggle the status by
double-clicking on it. It is also possible to highlight several lines (by
holding the <Shift> or <Ctrl> key) and to carry out the
modification for all highlighted lines.
Tip: By clicking on column headings, the data listed in
the dialog will be sorted in descending order. Clicking the same column header
a second time will sort the content in ascending order.
|
Toolbar
|
Lists a set of tools used to manipulate display
classes.
- (Hide Selected) –
Permits to hide parts without creating an assignment to a display class. See
the
Hide tool.
- (Show All) – Shows
all individually hidden parts again. See the
Regenerate tool.
- (Hide Display Class)
– Hides the elements of the selected display class.
- (Show Display Class)
– Shows the elements of the selected display class.
- (Hide Except Display
Class) – Hides the elements of all other display classes except for
the selected ones.
- (Show All Except Display
Class) – Shows the elements of all other display classes except for
the selected ones.
- (Assign to Display
Class) – Assigns elements to a display class. The desired class
must be selected in the list first. After clicking the button, select the
elements to be assigned to the display class in the model.
- (Remove from Display
Class) – Removes elements from a display class. The desired class
must be selected in the list first. After clicking the button, select the
elements to be removed from the display class in the model.
|
Complete groups
|
When checked, performs function on all part of a
group, irrespective of current selection.
|
Number of display classes
|
Sets the number of available display classes. If you
increase the value here, this increases the number of available classes in the
drawing.
|