Type |
Displays the selected end condition. |
Load |
Loads the default standard values for the current end condition type. |
Pin Dia |
Diameter of the pin used to bend the bar. |
Angle |
The bend angle. |
Length |
The bend length. |
Depth |
The offset dimension from the end of a crank to the main section of the bar. |
Tail/Leg |
The tail/leg length. A tail/leg length is automatically calculated unless you manually enter a value. |
Override Tail |
Check to enter a custom Tail Leg length. |
Rotation |
To rotate the end condition, enter any angle. |
Rotate End Condition |
Click to rotate all end conditions in 90 degree increments. |